EBMX Rear Shock with Upgraded Linkage and Triangle UK — Complete Suspension Transformation

Why Mountain Bike Shocks Just Don't Cut It

So, you've tried every mountain bike shock under the sun and they just aren't cutting it. Why is that?

The fact is, it's all in the oil. The physical size of a shock and how much oil it holds matters. As soon as things get hot, oil changes viscosity and cavitation occurs. This has a dramatic effect on both compression and rebound.

The bigger the shock, the better the performance — especially if you ride hard for long periods. But quality damping and spring rates matter too. That's why EBMX went to the people at YSS. With EBMX driving the requirements, they believe YSS has developed the best performing shock you can match to your Sur Ron Light Bee.

IN STOCK — READY TO SHIP!

Key Product Information: EBMX / YSS Custom Shock

Other Key Features

• Plug and play – Supplied with bushing kit for the stock swing arm and linkage (also works very well with the upgraded EBMX swing arm)

• High speed and low speed compression damping that actually work (unlike the stock shocks)

• Rebound adjustment clicker – Fine-tune your setup

• Multiple spring weight options – See table below

• Designed for a motorbike, not a mountain bike (like the stock shock)

• Huge oil reservoir keeps the shock cool even under hard riding

• Less travel but you would never know – This shock is a massive improvement in every way

• Extremely strong and good for jumping

Key Product Information: EBMX Custom Rear Linkage and Triangle

Included with all EBMX Custom Shocks purchased.

The EBMX shock is longer than the OEM shock and is not the same size eye to eye. This custom Rear Linkage and Triangle is set up to bring the EBMX shock in line with the travel of the stock shock, while reinforcing the structure of your bike.

EBMX Shock Spring Sizing Chart

This table is to be used for determining the correct spring rate for riders using the EBMX rear shock, linkage and triangle. There are two different configurations depending on if you are using the stock swing arm or the EBMX extended swing arm.

Travel Specifications

⚠️ Spring Weight Notes

Spring weight suggestions above are based on trail riding, not extreme riding or jumping. If you plan to ride trails with large drops or do large jumps, please upsize by 1 or 2 spring weights.

Fitment Compatibility

The ebmx custom rear shock sur ron light bee fits:

• Sur Ron Light Bee X (primary)

• Segway X260 / X160 (primary)

• E-Ride Pro (primary)

• E-Ride Pro SS (primary)

• E-Ride Pro SR (primary)

• 79bike Falcon-M (primary)

Why Choose the EBMX YSS Shock?

Problem: Stock Shocks Are Mountain Bike Shocks

The stock Sur Ron Light Bee shock is essentially a mountain bike shock. It lacks:

• Adequate oil volume

• Effective high/low speed compression damping

• Durability for motorbike use

Solution: The EBMX / YSS Custom Shock

The ebmx yss shock upgrade linkage triangle solves these problems with:

• Huge oil reservoir – Keeps shock cool during hard riding

• True high/low speed compression – Damping that actually works

• Motorbike-specific design – Built for e-moto weight and forces

• Reinforced linkage – Stronger than stock

Installation Notes

Plug and Play: The shock comes with a bushing kit for the stock swing arm and linkage. Everything you need is included.

EBMX Swing Arm Compatibility: If using the upgraded EBMX swing arm, remember to size up one spring weight as there is more leverage with the longer arm.

Linkage Included: The custom Rear Linkage and Triangle is included with all EBMX Custom Shocks purchased.

Complete Your Build

Browse our full range of electric dirt bike suspension and EBMX components. Pair this shock with an electric dirt bike swing arm for complete rear end transformation.

For stopping power, explore our electric dirt bike rear brake pedals and protect your investment with an electric dirt bike bash guard.

All purchases protected by our warranty policy. Shop our store.

Frequently Asked Questions (FAQ)

Q: Why is the EBMX shock heavier than stock?
A: The EBMX shock weighs 2.105kg vs 1.120kg stock. The additional weight comes from the huge oil reservoir and stronger construction — this is a motorbike shock, not a mountain bike shock.

Q: The EBMX shock has less travel (67mm vs 89mm stock). Is that a problem?
A: No — the custom linkage and triangle are designed to bring the EBMX shock in line with the travel of the stock shock. You get 205mm rear wheel travel with stock swing arm, or 220mm with the EBMX extended swing arm.

Q: Will this shock work with my stock swing arm?
A: Yes — the shock comes with a bushing kit for the stock swing arm and linkage. Use the spring sizing chart above for stock swing arm configuration.

Q: What spring rate do I need for my weight?
A: Use the spring sizing chart above. Spring weight suggestions are based on trail riding. If you do large drops or jumps, upsize by 1-2 spring weights.

Q: Does this shock work with the EBMX extended swing arm?
A: Yes — it works very well. Remember to size up one spring weight as there is more leverage with the longer arm.

Q: Is the linkage and triangle included?
A: Yes — the custom Rear Linkage and Triangle is included with all EBMX Custom Shocks purchased.

Q: Will this fit my E-Ride Pro?
A: Yes — the EBMX rear shock is compatible with E-Ride Pro, E-Ride Pro SS, and E-Ride Pro SR models.

Q: How is this different from mountain bike shocks?
A: The EBMX shock is designed specifically for a motorbike, not a mountain bike. It has a huge oil reservoir, true high/low speed compression damping, and is built to handle the weight and forces of an e-moto.

Ready to Upgrade Your Rear Suspension?

Order your EBMX rear shock with upgraded linkage and triangle uk today. We ship to the UK, USA, and Canada with full tracking and insurance.

📞 Call or Text (USA): +1 (929) 347-9885
💬 WhatsApp (UK): +44 (7760) 745171
✉️ Email: sales@wepedscooters.shop

IN STOCK — READY TO SHIP!

BUY NOW — EBMX Rear Shock with Linkage & Triangle